ACATS Fixed Trunk ISUP Test Suite
TEST SUITE OVERVIEW
References
Archive/Projectss7/ISUP_TS
Version20.07.36.01
Date23 Mar 2009
Number of Scenarios231
Number of Groups36
Average per Group6
GROUP/SCENARIOTEST PURPOSE
AUX
Test_CCA_Info_GNot currently supported
Test_MXXNot currently supported
Test_MXX2Not currently supported
Test_MXX3Not currently supported
ISUP_Circuit_Group_Resetandblocking1Not currently supported
ISUP_Circuit_Group_Resetandblocking2Not currently supported
ISUP_Circuit_Group_Blocking1Not currently supported
ISUP_Circuit_Group_Blocking2Not currently supported
ISUP_Circuit_Group_Blocking3HONot currently supported
ISUP_Circuit_Group_Blocking4MONot currently supported
ISUP_bloNot currently supported
ISUP_rscNot currently supported
T2I_Reset_CircuitNot currently supported
INIT
ISUP_Circuit_Group_Reset1Not currently supported
ISUP_Circuit_Group_Reset2Not currently supported
CSSVCircuit Supervision and Signalling Supervision
CSSV/
CS		Circuit Supervision
IBC_I_1_1Non allocated circuits. Discard Msg on rx of CIC relating to non existing circuit
CSSV/
RC		Reset of Circuits
IBC_V_1_2_1Tx release complete Msg on rx of RSC
IBC_V_1_2_2Not currently supported
IBC_V_1_2_3Not currently supported
IBC_V_1_2_4Not currently supported
IBC_V_1_2_5_aSwitch tx circuit grp reset on rx of 1 circuit grp reset msg
IBC_I_1_2_5_bSwitch discard Msg on rx of 1 circuit grp reset msg with indication to reset 0 circuits
IBC_I_1_2_5_cSwitch discard Msg on rx of 1 circuit grp reset msg with indication to reset more circuits than possible
IBC_V_1_2_6Not currently supported
IBC_V_1_2_7Switch reset blocked condition, answer with acknowledgement msg & leave circuits idle
CSSV/
BC		Blocking of Cirsuits
CSSV/
BC/
CGBU		Circuit Group Blocking Unblocking
IBC_V_1_3_1_1_aTx msg to block all circuits, check circuits blocked, unblock & idle state (maintenance oriented)
IBC_I_1_3_1_1_bCGB msg oriented to maintenance discarded by switch if no circuits affected by msg
IBC_I_1_3_1_1_cCGB msg for maintenance purposes discarded by IUT if more than 32 circuits affected by msg (maintenance oriented)
IBC_V_1_3_1_1_dTx msg to block all circuits, check circuits blocked, unblock & idle state (hw failure oriented)
IBC_I_1_3_1_1_eCGB oriented to failure in hw discarded by switch if no circuits affected by msg (hw failure oriented)
IBC_I_1_3_1_1_fCGB msg for hw purposes failure discarded by IUT if more than 32 circuits affected by msg (hw failure oriented)
IBC_V_1_3_1_2_aNot currently supported
IBC_V_1_3_1_2_bNot currently supported
IBC_V_1_3_1_3Unblock circuit blocked by maintenance oriented CGB with Unblocking msg
IBC_V_1_3_1_4Verify hardware failure oriented blocking state cannot be removed by an Unblocking msg
IBC_V_1_3_1_5_aTx CGB msg to already blocked circuits to get CGB acknowledgement answer (maintenance oriented)
IBC_V_1_3_1_5_bTx CGB msg to already blocked circuits to get CGB acknowledgement answer (hw failure oriented)
IBC_I_1_3_1_6_aReturn CGU acknowledge msg if CGU msg rxed by IUT for unblocked circuits (maintenance oriented)
IBC_I_1_3_1_6_bReturn CGU acknowledge msg if CGU msg rxed by IUT for unblocked circuits (hw failure oriented)
IBC_I_1_3_1_7_aCircuit group blocking for unequipped circuits (all maintenance oriented)
IBC_I_1_3_1_7_bCircuit group blocking for unequipped circuits (all hw failure oriented)
IBC_I_1_3_1_8_aNot currently supported
IBC_I_1_3_1_8_bNot currently supported
IBC_I_1_3_1_9_aUnexpected CGBA msg oriented to maintenance discarded by switch (not blocking affected circuits)
IBC_I_1_3_1_9_bUnexpected CGBA msg oriented to hw failure discarded by switch (not blocking affected circuits)
IBC_I_1_3_1_10_aNot currently supported
IBC_I_1_3_1_10_bNot currently supported
CSSV/
BC/
CBU		Circuit Blocking Unblocking
IBC_V_1_3_2_1Switch block & unblock single circuits using BLO & UBL msgs
IBC_V_1_3_2_2Not currently supported
IBC_V_1_3_2_3Not currently supported
IBC_V_1_3_2_4Not currently supported
IBC_V_1_3_2_5Not currently supported
IBC_V_1_3_2_6Unblock blocked circuit by maintenance oriented CGU msg (single circuit Blocking msg)
IBC_I_1_3_2_7IUT return Unblocking acknowledge msg if for unblocked circuit unexpected Unblocking msg rxed
IBC_I_1_3_2_8Not currently supported
IBC_I_1_3_2_9Not currently supported
CSSV/
CCTC		Continuity Check Test Call
IBC_V_1_4_1Perform continuity check procedure for proper alignment of circuits correctly
IBC_V_1_4_2This is same case as previous one but this time msgs are tx by switch & not by network analyzer
IBC_V_1_4_3IUT rx correctly msgs associated with unsuccessful continuity check procedure
IBC_V_1_4_3_using_Check_COT_Tone1Not currently supported
IBC_I_1_4_4Not currently supported
IBC_I_1_4_5If no Continuity check rq msg rxed, IUT tx Reset circuit msg (verify timer T27)
CSSV/
RUSIM		Receipt of Unreasonable Signaling Information Messages
IBC_I_1_5_1_aIUT tx Release complete msg if unexpected release msg is rxed
IBC_I_1_5_1_bIUT discard release complete msg if relating to idle circuit
IBC_I_1_5_1_cIUT discard unexpected msg other than Release & release complete & return Reset circuit msg
IBC_I_1_5_2_aIUT discard unexpected msg after backward msg is rxed
IBC_I_1_5_2_bIUTtx Reset circuit msg if unexpected msg is rxed before backward msg for incoming call
IBC_I_1_5_3Not currently supported
IBC_I_1_5_3_manualNot currently supported
CSSV/
RU
CSSV/
RU/
MS
IBC_V_1_7_1_1Not currently supported
IBC_V_1_7_1_2_aNot currently supported
IBC_V_1_7_1_2_bNot currently supported
IBC_V_1_7_1_3Not currently supported
IBC_V_1_7_1_4Not currently supported
IBC_V_1_7_1_5Not currently supported
IBC_V_1_7_1_6Not currently supported
IBC_V_1_7_1_7Not currently supported
CSSV/
RU/
PA
IBC_I_1_7_2_1Not currently supported
IBC_I_1_7_2_2_aNot currently supported
IBC_I_1_7_2_2_bOHNENot currently supported
IBC_I_1_7_2_2_bNot currently supported
IBC_I_1_7_2_2_bBISNot currently supported
IBC_I_1_7_2_3_aNot currently supported
IBC_I_1_7_2_3_bNot currently supported
IBC_I_1_7_2_4Not currently supported
IBC_I_1_7_2_5Not currently supported
IBC_I_1_7_2_6_aNot currently supported
IBC_I_1_7_2_6_bNot currently supported
IBC_I_1_7_2_7_aNot currently supported
IBC_I_1_7_2_7_bNot currently supported
IBC_I_1_7_2_8Not currently supported
IBC_I_1_7_2_9_aNot currently supported
IBC_I_1_7_2_9_bNot currently supported
IBC_I_1_7_2_10Not currently supported
IBC_I_1_7_2_10_manualNot currently supported
IBC_I_1_7_2_11Not currently supported
IBC_I_1_7_2_12Not currently supported
IBC_I_1_7_2_13_aNot currently supported
IBC_I_1_7_2_13_bNot currently supported
CSSV/
RU/
PV
IBC_I_1_7_3_3Not currently supported
CSSV/
RU/
PV/
FD
IBC_S_1_7_3_1_b_9_aNot currently supported
IBC_S_1_7_3_1_b_9_bNot currently supported
IBC_S_1_7_3_1_b_9_cNot currently supported
IBC_S_1_7_3_1_b_23Not currently supported
IBC_S_1_7_3_1_b_51Not currently supported
IBC_S_1_7_3_1_b_54Not currently supported
CSSV/
RU/
PV/
BD
IBC_S_1_7_3_2_5_a_manualNot currently supported
IBC_S_1_7_3_2_5_b_manualNot currently supported
IBC_S_1_7_3_2_5_c_manualNot currently supported
IBC_S_1_7_3_2_5_d_manualNot currently supported
IBC_S_1_7_3_2_5_e_manualNot currently supported
IBC_S_1_7_3_2_5_f_manualNot currently supported
IBC_S_1_7_3_2_5_g_manualNot currently supported
IBC_S_1_7_3_2_16_a_manualNot currently supported
IBC_S_1_7_3_2_16_b_manualNot currently supported
IBC_S_1_7_3_2_16_c_manualNot currently supported
IBC_S_1_7_3_2_16_d_manualNot currently supported
IBC_S_1_7_3_2_16_e_manualNot currently supported
IBC_S_1_7_3_2_21_manualNot currently supported
IBC_S_1_7_3_2_46_a_manualNot currently supported
IBC_S_1_7_3_2_46_b_manualNot currently supported
IBC_S_1_7_3_2_46_c_manualNot currently supported
IBC_S_1_7_3_2_60_a_manualNot currently supported
IBC_S_1_7_3_2_60_b_manualNot currently supported
IBC_S_1_7_3_2_60_c_manualNot currently supported
CSSV/
RU/
PV/
RM
IBC_S_1_7_3_4_a_12_a_automatically_checkedNot currently supported
IBC_S_1_7_3_4_a_12_b_1_automatically_checkedNot currently supported
IBC_S_1_7_3_4_a_12_b_2_automatically_checkedNot currently supported
IBC_S_1_7_3_4_a_12_c_automatically_checkedNot currently supported
NCSNormal Call Setup
NCS/
BWCS		Both Way Circuit Selection
IBC_V_2_1_1_manualIUT initiate outgoing call on circuit capable of bothway operation when IUT is controlling SP
IBC_V_2_1_2_manualIUT initiate outgoing call on circuit capable of bothway operation when IUT is non-controlling SP
NCS/
CAS
IBC_V_2_2_1_a_manualVerify that a call can be successfully established (all digits included in the outgoing IAM)
IBC_V_2_2_1_bVerify that a call can be successfully established (all digits included in the incoming IAM)
IBC_V_2_2_2_a_manualVerify that the IUT can initiate a call using an IAM followed by a SAM
IBC_V_2_2_2_bNot currently supported
NCS/
SCS		Successful Call Setup
IBC_V_2_3_1_a_manualComplete call successfully using various indications in address complete msg (Subscr free & ISDN)
IBC_V_2_3_1_b_manualComplete call successfully using various indications in address complete msg (Subscr free & non-ISDN)
IBC_V_2_3_1_c_manualComplete call successfully using various indications in address complete msg (No indication & ISDN)
IBC_V_2_3_1_d_manualComplete call successfully using various indications in address complete msg (No indication & non-ISDN)
IBC_V_2_3_1_e_manualNot currently supported
IBC_V_2_3_1_f_manualNot currently supported
IBC_V_2_3_1_g_manualNot currently supported
IBC_V_2_3_1_h_manualNot currently supported
IBC_V_2_3_2_a_manualComplete call successfully using address complete msg, call progress msg & answer msg (CPG alerting)
IBC_V_2_3_2_b_manualComplete call successfully using address complete msg, call progress msg & answer msg (CPG progress)
IBC_V_2_3_2_c_manualCurrently not supported
IBC_V_2_3_2_d_manualCurrently not supported
IBC_V_2_3_2_e_manualCurrently not supported
IBC_V_2_3_2_f_manualCurrently not supported
IBC_V_2_3_3_manualComplete call successfully using connect msg (indication: subscr free & ISDN)
IBC_V_2_3_4_a_automatically_checkedNot currently supported
IBC_V_2_3_4_b_automatically_checkedNot currently supported
IBC_V_2_3_4_c_automatically_checkedNot currently supported
IBC_V_2_3_6_a_manualVerify that circuit blocking & unblocking procedure correctly rxed during a call
IBC_V_2_3_6_b_manualVerify that circuit blocking & unblocking procedure correctly initiated during a call
IBC_V_2_3_6_c_manualVerify that circuit blocking & unblocking procedure correctly initiated during a call (c)
IBC_V_2_3_6_d_manualVerify that circuit blocking & unblocking procedure correctly initiated during a call (d)
NCR
IBC_V_3_1_a_manualVerify that calling party successfully release a call prior to rx of any backward msg (outgoing)
IBC_V_3_1_b_manualVerify that calling party successfully release a call prior to rx of any backward msg (incoming)
IBC_V_3_2_a_manualVerify that calling party successfully release a call prior to rx of answer (outgoing)
IBC_V_3_2_b_manualVerify that calling party successfully release a call prior to rx of answer (incoming)
IBC_V_3_3_a_manualVerify that calling party successfully release a call after answer (outgoing)
IBC_V_3_3_b_manualVerify that calling party successfully release a call after answer (incoming)
IBC_V_3_4_a_manualNot currently supported
IBC_V_3_4_b_manualNot currently supported
IBC_V_3_5_a_manualNot currently supported
IBC_V_3_5_bNot currently supported
IBC_V_3_8_manualNot currently supported
UCS
IBC_V_4_1_a_manualNot currently supported
IBC_V_4_1_b_manualNot currently supported
AS
IBC_V_5_1Not currently supported
AS/
T
IBC_I_5_2_1_manualNot currently supported
IBC_I_5_2_2_manualNot currently supported
IBC_V_5_2_3Not currently supported
IBC_V_5_2_4_manualNot currently supported
IBC_I_5_2_5Not currently supported
AS/
RCDC
IBC_V_5_3_1_manualNot currently supported
IBC_V_5_3_2_manualNot currently supported
SCS
SCS/
CCC
IBC_V_6_1_1_bNot currently supported
IBC_V_6_1_1_b_using_Check_COT_Tone1Not currently supported
IBC_V_6_1_2Not currently supported
IBC_V_6_1_3_a_manualNot currently supported
IBC_V_6_1_3_bNot currently supported
SCS/
DS
IBC_V_6_3_1_manualNot currently supported
BS
BS/
UNR
IBC_V_7_1_1_f_manualNot currently supported
IBC_V_7_1_1_g_manualNot currently supported
IBC_V_7_1_1_h_manualNot currently supported
IBC_V_7_1_1_i_manualNot currently supported
IBC_V_7_1_1_j_manualNot currently supported
BS/
AUD
IBC_V_7_2_1_b_manualNot currently supported
Coming_from_FW_TS
Call_CdP_Rel_OENot currently supported
Call_CON_Reply_OENot currently supported
Call_CON_Allowed_TENot currently supported
Call_Overlap_OENot currently supported
Call_Overlap_TENot currently supported
Startup_OENot currently supported
FW_TS
FW_TS/
Block
Block_TETester sends Circuit Block message to IUT and waits for Ack.
Unblock_TETester sends Circuit Unblock message to IUT and waits for Ack.
Group_Block_TETester sends Circuit Group Block message to IUT and waits for Ack.
Group_Unblock_TETester sends Circuit Group Unblock message to IUT and wait for Ack.
FW_TS/
Basic_Calls
Call_TETest if IUT can accept an incoming ISUP call. Call released by tester.
Call_CdP_Rel_TESame as Call_TE, but called party (IUT) releases the call.
Call_OETest if IUT can create and release an outgoing ISUP call.
FW_TS/
Reset
Reset_TETester sends Reset Circuit to IUT.
Group_Reset_TETester sends Circuit Group Reset message to IUT and waits for Ack.
Group_Reset_2_TETester sends 2 Circuit Group Reset messages to IUT
ISUP_Basic_Call_TC_BK
Startup
T2I_Generic_ISUP_StartupAnswer the incoming GRS with GRA
Reset
T2I_Circuit_Group_ResetTester sends Circuit Group Reset message to IUT and waits for Ack.
T2I_Circuit_Group_Reset_2Tester sends 2 Circuit Group Reset messages to IUT
I2T_Generic_Answer_for_GRS_Or_RSCAnswer the incoming GRS message with GRA
Block_Unblock
T2I_Circuit_Group_BlockTester sends Circuit Group Block message to IUT and waits for Ack.
T2I_Circuit_BlockTester sends Circuit Block message to IUT and waits for Ack.
T2I_Circuit_UnblockTester sends Circuit Unblock message to IUT and waits for Ack.
T2I_Circuit_Group_UnblockTester send Circuit Group Unblock message to IUT and wait for Ack.
Incoming_Call
T2I_Incoming_CallTest if IUT can accept an incoming ISUP call. Call released by tester.
T2I_Incoming_Call_CdP_RelSame as T2I_Incoming_Call, but called party (IUT) releases the call.
T2I_OverlapTester makes call with IAM having an incomplete number, then sends SAMS
T2I_CON_AllowedTester makes call, IUT answers with CON or ACM+ANM
T2I_HeartbeatTester makes call, IUT answers with CON or ACM+ANM, then tester plays a sound file
T2I_Inband_Channel_CheckBased on Q.764.1 section G.3 "Procedure using a conversation test".
T2I_Inband_Multichannel_CheckBased on Q.764.1 section G.3 "Procedure using a conversation test"
T2I_Circuit_InitInitial testing of circuits with circuit group blocking. Initiated by tester
Outgoing_Call
I2T_Outgoing_CallTest if IUT can create and release an outgoing ISUP call.
I2T_Outgoing_Call_CdP_RelSame as I2T_Outgoing_Call, but called party (Tester) releases the call.
I2T_OverlapIUT makes outgoing call with overlap procedure.
I2T_CON_ReplyIUT makes outgoing call, tester replies with CON instead of ACM+ANM
I2T_Circuit_InitInitial testing of circuits with circuit group blocking, initiated by IUT
I2T_Circuit_Init_BSCInitial testing of circuits with circuit group blocking, initiated by IUT
Mux
Out_1_In_2Call from gate 1 to gate 2.
tmpTest if IUT can create and release an outgoing ISUP call.

VariableDefault ValueDescription
Access_Transport'00'H(null)
Access_Delivery_InformationISUP_Access_Delivery_Informati...(null)
Timer_Delay_Duration3000(null)
T35_Duration15000(null)
Timer_IUT_Action_Duration30000(null)
T1_Duration15000(null)
T9_Duration90000(null)
T7_Duration20000(null)
CdPN_Rest_Part_3"F"(null)
CdPN_Rest_Part_2"4"(null)
CdPN_Rest_Part_1"6"(null)
Timer_SAM_Duration1000(null)
CdPN"7000036"(null)
CgPN"7180000"(null)
CdPN_1st_Part"7005"(null)
Timer_Start_Duration1000(null)
Timer_Guard_Duration120000(null)
Timer_T_DELAY4000(null)
Timer_WF_Reply_Value3000(null)
OPC3883(null)
OPC22904(null)
Log_1_DPC14433(null)
Log_1_DPClink13840(null)
Log_1_DPClink22322(null)
Log_1_SSFNational_network(null)
SLC0(null)
CIC1(null)
Circuit_Group_Reset_Range14(null)
Circuit_Group_Reset_Status'0000'H(null)
Circuit_Group_Block_Range9(null)
Called_Party_Number"912553210"(null)
Called_Party_Number_222b"9125"(null)
Calling_Party_Number"0211"(null)
TSP_CIC_R_UNEQUIPPED39(null)
TSP_CIC_R1(null)
TSP_GrpCIC1(null)
TSP_GrpCIC217(null)
TSP_tol5(null)
GRS_BA_RANGE33(null)
GRS_BA_STATUS3'03'H(null)
TSP_T_GUARD60000(null)
TSP_T_WAIT10000(null)
RAWMSGPRMTR'010460010A0002090783901952351...(null)
RAWMSGPRMTR2'010460010A0002090783901952351...(null)
RAWMSGPRMTR3'00'H(null)
RAWMSGPRMTR4'00'H(null)
RAWMSGPRMTR1716'690138011D00'H(null)
RAWMSGPRMTR_param1721'010460010A0002090783901952351...(null)
RAWMSGPRMTR_param1722b'2C000139030AB00100'H(null)
RAWMSGPRMTR_param1723a'010460010A0002090783901952351...(null)
RAWMSGPRMTR_param1723b'010460010A0002090783901952351...(null)
TCV_A0(null)
TCV_B0(null)
SAM_subsequent_number"\"5100\""(null)
CGR_Range14(null)
CGR_Range_214(null)
CGR_Status'EFFF'H(null)
CGR_Status_2'EFFF'H(null)
CGB_Range14(null)
CGB_Status'EFFF'H(null)
Inband_Range3(null)
Inband_Status'07'H(null)
Range14(null)
Status'00'H(null)
T10_Duration6000(null)
T12_Duration15000(null)
T14_Duration15000(null)
T18_Duration15000(null)
T22_Duration15000(null)
Timer_Continue_Duration5000(null)
Timer_Reply_Duration3000(null)
Range_Tx14(null)
Event_IndicationISUP_Event_Indication_T::Alert...(null)
Event_PresentationISUP_Event_Presentation_T::No_...(null)
Resume_Or_Suspend_Indicators_TxISUP_Resume_Or_Suspend_Indicat...(null)
Resume_Or_Suspend_Indicators_RxISUP_Resume_Or_Suspend_Indicat...(null)
Continuity_Indicators_TxISUP_Continuity_Indicators_T::...(null)
SatelliteISUP_Satellite_T::S_None_In_Th...(null)
Continuity_CheckISUP_Continuity_Check_T::COTC_...(null)
Echo_Control_Device_indicatorISUP_Echo_Control_Device_Indic...(null)
Call_TypeISUP_Call_Type_T::CT_National(null)
ETE_Method_IndicatorISUP_ETE_Method_Indicator_T::N...(null)
Interworking_IndicatorISUP_Interworking_Indicator_T:...(null)
ETE_Information_IndicatorISUP_ETE_Information_Indicator...(null)
ISDN_User_PartISUP_ISDN_User_Part_T::All_The...(null)
ISDN_PreferenceISUP_ISDN_Preference_T::ISP_No...(null)
ISDN_AccessISUP_ISDN_Access_Indicator_T::...(null)
SCCP_Method_IndicatorISUP_SCCP_Method_Indicator_T::...(null)
Nature_Of_Address_CgPNISUP_Nature_Of_Address_T::NOA_...(null)
Nature_Of_Address_CdPNISUP_Nature_Of_Address_T::NOA_...(null)
Odd_Or_Even_IndicatorISUP_Odd_Or_Even_Indicator_T::...(null)
Numbering_PlanISUP_Numbering_Plan_T::NP_ISDN(null)
INN_IndicatorISUP_INN_Indicator_T::INN_Rout...(null)
In_Band_Information_IndicatorISUP_In_Band_Information_Indic...(null)
Screening_IndicatorISUP_Screening_Indicator_T::SI...(null)
Address_PresentationISUP_Address_Presentation_T::A...(null)
Number_IncompleteISUP_Number_Incomplete_T::NI_N...(null)
Call_DiversionISUP_Call_Diversion_T::Call_Di...(null)
Simple_Segmentation_IndicatorISUP_Simple_Segmentation_Indic...(null)
MLPP_User_IndicatorISUP_MLPP_User_Indicator_T::No...(null)

Copyright © ACATS Forum 2010 on behalf of the test suite author. All rights reserved. Specifications may change subject to requirements.

08 Jan 2010Produced by SAFIRE V20.07.36.01
www.SAFIRE-World.com		 Test Suite Overview