| V5 L2 Professional Test Suite |
|---|
| TEST SUITE OVERVIEW |
| References | ETSI - ETS 300 324-1, ETS 300 347-1, ETSI - ETS 300 324-2, ETS 300 347-2, ETSI - ETS 300 324-6, ETS 300 347-6 |
|---|---|
| Archive/Project | fixed_access/V5_L2_TS |
| Version | 18661902 |
| Date | 28 Jun 2007 |
| Number of Scenarios | 56 |
| Number of Groups | 8 |
| Average per Group | 7 |
| GROUP/SCENARIO | TEST PURPOSE |
|---|
| LAPV5_EF | |
|---|---|
| LAPV5_EF/ IT |
|
| TC11S__01 | Generic test of an AN ISDN channel. A link to the ISDN-BA entity of the IUT shall be established. The ISDN-BA entity shall respond to a received SABME command with a UA response. |
| TC11S__02 | Establishment of DL link. SABM (P=1) is sent to IUT. IUT should answer with UA(F=1) |
| LAPV5_EF/ BV |
|
| TC13S__02 | On receipt I-Frame with 520 Octets SABME should be returned |
| LAPV5_EF/ BI |
|
| TC15S__02 | On receipt of a too-short frame (less than 5 octets), the IUT shall discard the invalid frame. Afterward an I-frame exchange shall be successful. |
| TC15S__02N | On receipt of a too-short frame (less than 5 octets), the IUT shall discard the invalid frame. Afterward an I-frame exchange shall be successful. |
| LAPV5_DL | |
| LAPV5_DL/ IT |
|
| TC21S__01 | On receipt of a RR command the IUT shall send a RR response. |
| LAPV5_DL/ CA |
|
| TC22S__01V | On receipt of REJ response the I frame with N(S) = N(R) received is retransmitted |
| TC22S__01N | On receipt of REJ response the I frame with N(S) = N(R) received is retransmitted |
| TC22S__01 | On receipt of a REJ response the I-Frame with the sequence number N(S) = N(R) shall be re-transmitted. |
| TC22S__02 | On T200 expiry the IUT either re-sent the last sent I-frame or send RR command(P=1) |
| TC22S__02V | On T200 expiry the IUT either re-sent the last sent I-frame or send RR command(P=1) |
| TC22S__02N | On T200 expiry the IUT either re-sent the last sent I-frame (P=1) |
| TC22S__02VN | On T200 expiry the IUT either re-sent the last sent I-frame or send RR command(P=1) |
| LAPV5_DL/ BV |
|
| TC23S5001 | On receipt of a SABME frame (P=1) the IUT shall send a UA frame (F=1). |
| TC23S5004 | On receipt of a DM frame (P=1) the IUT shall enter state 9.0 and try to re-established |
| TC23S5101 | On receipt of a UA frame (F=1), IUT shal enter state 7.0 |
| TC23S5101N | On receipt of a UA frame (F=1), IUT shal enter state 7.0 |
| TC23S5102 | On receipt of a DM frame (P=1) the IUT shall enter state 9.0 and try to re-established |
| TC23S5102N | On receipt of a DM frame (P=1) the IUT shall enter state 9.0 and try to re-established |
| TC23S5103 | On receipt of a DM frame (P=0) the IUT shall take no action until T200 expiry and then start re-establish |
| TC23S5103N | On receipt of a DM frame (P=0) the IUT shall take no action until T200 expiry and then start re-establish |
| TC23S5104 | On receipt of a RR comand frame (P=1) the IUT shall take no action until T200 expiry and then start re-establish |
| TC23S5104N | On receipt of a RR comand frame (P=1) the IUT shall take no action until T200 expiry and then start re-establish |
| TC23S5112 | On receipt of a RNR comand frame (P=1) the IUT shall take no action until T200 expiry and then start re-establish |
| TC23S5112N | On receipt of a RNR comand frame (P=1) the IUT shall take no action until T200 expiry and then start re-establish |
| TC23S5114 | On receipt of a RNR response frame (P=1) the IUT shall take no action until T200 expiry and then start re-establish |
| TC23S5114N | On receipt of a RNR response frame (P=1) the IUT shall take no action until T200 expiry and then start re-establish |
| TC23S7001 | On receipt of a RR command (P=1), the IUT shall send a RR response (F=1) and remain in state 7.0. |
| TC23S7002 | On receipt of a RR command (P=0), the IUT shall remain in state 7.0. |
| TC23S7102 | On receipt of an I frame (P=1) the IUT shall send a RR response (F=1) and enter state 7.0 |
| TC23S8002 | After having sent an I frame(P=1), on receipt of a RR response (F=1) the IUT shall enter state 7.0. |
| TC26S7002 | On T203 expiry IUT shall send a RR command (P=1) |
| LAPV5_DL/ BI |
|
| TC24S7001 | On receipt of a SABME frame (P=1), the IUT shall send an UA frame (F=1). |
| TC26S5001 | On T200 expiry, the IUT shall repeat the SABME frame (P=1). |
| Set_States | Set and check Data Link States |
| State_90 | Link unestablished |
| State_50 | Link establishment |
| State_50_O | Link establishment |
| State_50N | Link establishment |
| State_51 | LAPV5_DL_70_51 |
| State_51V | LAPV5_DL_70_51 |
| State_51N | LAPV5_DL_70_51 |
| State_70 | Link established |
| State_70V | Link established |
| State_70N | Link established towards IUT |
| State_71 | Link established PDUs rejected |
| State_71N | Link established PDUs rejected REJ |
| State_74 | LAPV5_DL_70_74 |
| State_74N | LAPV5_DL_70N_74N |
| State_80 | Transition from State 7.0 to State 8.0 after T203 timer expiry |
| State_80N | Transition from State 7.0 to State 8.0 after T203 timer expiry |
| State_81 | LAPV5_DL_80_81 |
| State_81N | LAPV5_DL_80N_81N |
| State_84 | LAPV5_DL_80_84 |
| State_84N | LAPV5_DL_80N_84N |
| State_90V | LAPV5_DL_51_90 |
| State_90N | LAPV5_DL_51N_90N |
| Variable | Default Value | Description |
|---|---|---|
| N201 | 260 | (null) |
| Timer_AC_Short_Value | 3000 | (null) |
| Timer_Delay_Value | 3000 | (null) |
| Timer_NOAC_Value | 3000 | (null) |
| Timer_Start_Value | 1000 | (null) |
| Timer_T200_Max_Value | 1100 | (null) |
| Timer_T203_Max_Value | 11000 | (null) |
| Timer_T203_Min_Value | 9000 | (null) |
| V5_Entity_Mode | V5_User_Mode | (null) |
| Copyright © ACATS Forum 2008 on behalf of the test suite author. All rights reserved. Specifications may change subject to requirements. |
| 28 Mar 2008 | Produced by SAFIRE V19.02.10.01 www.SAFIRE-World.com |
Test Suite Overview |