V5 L3 AN Framework Test Suite
TEST SUITE OVERVIEW
References ETSI - ETS 300 324-1, ETS 300 347-1, ETSI - ETS 300 324-2, ETS 300 347-2, ETSI - ETS 300 324-6, ETS 300 347-6
Archive/Project fixed_access/v5_l3_an_FTS
Version 18661902
Date 27 Jun 2007
Number of Scenarios 10
Number of Groups 9
Average per Group 1
GROUP/SCENARIO TEST PURPOSE
CTRL
CTRL/
IT
TC11__SM_01 Run the test step STARTUP_AN (refer to close 4.3.1.1).
CTRL/
CA
TC12__S1_01 On receipt of a COMMON CONTROL message containing the control_function_id IE "variant & interface id", the IUT shall send a COMMON CONTROL ACK message containing the same control_function_id IE.
TC12__S1_02 On receipt of a PORT CONTROL message containing the control_function_element IE FE204 (block_cmd), the IUT shall send a PORT CONTROL ACK message containing the same control_function_element IE.
CTRL/
BV
CTRL/
BV/
COM
TC1312SM_02 On receipt of a PORT CONTROL ACK containing the control_function_element IE FE204 (block_cmd) after sending a PORT CONTROL message containing the control_function_element IE FE204 (block_cmd), the IUT shall not repeat the original message.
CTRL/
BV/
PORT
TC1321S2_02 On receipt of a COMMON CONTROL message containing the control_function_id IE "restart req" the IUT shall send a COMMON CONTROL message containing the control_function_id IE "restart complete".
PSTN
PSTN/
IT
TC21_S1_01 On receipt of a Status_Enquiry message, IUT should sent out a Status message.
PSTN/
BI
TP25_S1_03 Check that the IUT discards an ESTABLISH message (sends no ESTABLISH ACK message) containing an unspecified protocol_discriminator IE. The IUT shall remain in the PSTN_path_state AN1 (Null).
LINK
LINK/
CA
TC32_1S1_01 On receipt of a LINK CONTROL message containing the link_control_function IE FE302 (link_unblock_req), the IUT shall send a LINK CONTROL ACK message containing the same link_control_function IE.
LINK/
BO
TC34_1S1_01 On receipt of a LINK CONTROL ACK message the IUT shall ignore the message.
PROTECT
PROTECT/
CA
TC52_S0_01 On receipt of a RESET SN COM message, the IUT shall send a RESET SN ACK message.On receipt of a second RESET SN COM message, the IUT shall not send a RESET SN ACK message.

Variable Default Value Description
Timer_Start_Value 1000 (null)
Timer_NOAC_Value 3000 (null)
Timer_TAC_Short_Value 3000 (null)
Timer_TAC_Long_Value 60000 (null)
Timer_Interface_Startup_Value 10000 (null)
V5_PSTN_L3_Address 129 (null)
V5_PSTN_L3_Address_Unprovisionned 45 (null)
V5_Variant 0 (null)
V5_Interface_ID '00000A'H (null)
V5_Logical_C_Channel_Identification 0 (null)
V5_Link_1_L3_Address 1 (null)
V5_Link_2_L3_Address 2 (null)
PICS_Support_2nd_PSTN_Port TRUE (null)
PICS_Support_2nd_Link TRUE (null)
PICS_Support_V5_Ed2 TRUE (null)
PICS_Support_ISDN_Port TRUE (null)
PICS_Support_V52 TRUE (null)

Copyright © ACATS Forum 2008 on behalf of the test suite author. All rights reserved. Specifications may change subject to requirements.

02 Apr 2008 Produced by SAFIRE V19.02.10.01
www.SAFIRE-World.com
Test Suite Overview