| Test IUT (V5 Access Network) |
|---|
| TEST SUITE OVERVIEW |
| References | |
|---|---|
| Archive/Project | fixed_access/v5_l3_an_ts |
| Version | 20.07.36.01 |
| Date | 22 Sep 2009 |
| Number of Scenarios | 44 |
| Number of Groups | 16 |
| Average per Group | 2 |
| GROUP/SCENARIO | TEST PURPOSE |
|---|
| CTRL | |
|---|---|
| CTRL/ IT | |
| TC11__SM_01 | Run the test step STARTUP_AN (refer to close 4.3.1.1). |
| CTRL/ CA | |
| TC12__S1_01 | On receipt of a COMMON CONTROL message containing the control_function_id IE "variant & interface id", the IUT shall send a COMMON CONTROL ACK message containing the same control_function_id IE. |
| TC12__S1_02 | On receipt of a PORT CONTROL message containing the control_function_element IE FE204 (block_cmd), the IUT shall send a PORT CONTROL ACK message containing the same control_function_element IE. |
| CTRL/ BV | |
| CTRL/ BV/ COM | |
| TC1311SM_03 | Handling Req VID and VID Procedures from both sides |
| TC1312SM_02 | On receipt of a PORT CONTROL ACK containing the control_function_element IE FE204 (block_cmd) after sending a PORT CONTROL message containing the control_function_element IE FE204 (block_cmd), the IUT shall not repeat the original message. |
| CTRL/ BV/ PORT | |
| TC1321S2_01 | On receipt of a PORT CONTROL message containing the control_function_element IE FE204 (block_cmd), the IUT shall send a PORT CONTROL ACK message containing the same control_function_element IE. |
| TC1321S2_02 | On receipt of a COMMON CONTROL message containing the control_function_id IE "restart req" the IUT shall send a COMMON CONTROL message containing the control_function_id IE "restart complete". |
| TC1324SM_04 | Unblocking and blocking PSTN port and seting PSTN_AN1_6 |
| PSTN | |
| TC22__SM_01 | Orininating Call |
| TC22__SM_02 | Terminating Call |
| TC22__SM_02_DICS | LE disconnecting |
| PSTN/ IT | |
| TC21_S1_01 | On receipt of a Status_Enquiry message, IUT should sent out a Status message. |
| PSTN/ BI | |
| TP25_S1_03 | Check that the IUT discards an ESTABLISH message (sends no ESTABLISH ACK message) containing an unspecified protocol_discriminator IE. The IUT shall remain in the PSTN_path_state AN1 (Null). |
| PSTN/ BV | |
| TC23__S1_01 | On receipt of a Status_Enquiry message, IUT should sent out a Status message. |
| TC23__S1_02 | |
| TC23__S1_03 | |
| TC23__S1_06 | LE disconnecting |
| PSTN/ CA | |
| LINK | |
| LINK/ CA | |
| TC32_1S1_01 | On receipt of a LINK CONTROL message containing the link_control_function IE FE302 (link_unblock_req), the IUT shall send a LINK CONTROL ACK message containing the same link_control_function IE. |
| LINK/ BO | |
| TC34_1S1_01 | On receipt of a LINK CONTROL ACK message the IUT shall ignore the message. |
| LINK/ IT | |
| TC32__SM_01 | Link_init_id_request |
| LINK/ BV | |
| TC33_7S2223 | Link1 unblocking |
| TC33_7S2224 | Remote AN Link 1 Bloking |
| PROTECT | |
| PROTECT/ CA | |
| TC52_S0_01 | On receipt of a RESET SN COM message, the IUT shall send a RESET SN ACK message.On receipt of a second RESET SN COM message, the IUT shall not send a RESET SN ACK message. |
| TC52_S0_02 | On receipt of SWITCH OVER, the IUT shall send a RESET SN COM message.After receiving a RESET SN ACK message, the IUT shall not send a RESET SN ACK message. |
| PROTECT/ BV | |
| TC53__SM_01 | On receipt of SWITCH OVER COM, the IUT shall send a SWITCH OVER ACK message. After receiving a RESET SN ACK message, the IUT shall not send a RESET SN ACK message. |
| Set_States | |
| INTERNAL_Activate_Data_Links | |
| V5_Startup_AN_no_port_block | |
| CTRL_COM_Variant_Interface_Id | |
| CTRL_COM_Restart | |
| CTRL_PORT_PSTN_AN20_10_PSTN_AN6 | |
| CTRL_PORT_PSTN_AN10_20_PSTN_AN1 | |
| PSTN_AN1_2_establish_orig_SOLINET | |
| PSTN_AN1_2_establish_orig | |
| PSTN_AN1_5_establish_inc | |
| Link_Id_Procedure | |
| LINK_CTRL_Link1_AN20_10_blocking | |
| LINK_CTRL_Link1_AN10_20_unblocking | |
| LINK_CTRL_Link1_AN20_blockingandunblocking | |
| LINK_CTRL_Link2_AN20_10_blocking | |
| LINK_CTRL_Link2_AN10_20_unblocking | |
| LINK_CTRL_Link2_AN20_blockingandunblocking | |
| PROT_Reset_seq_number_com | |
| BCC | |
| TC41__SM_01_ALLOC | Terminating Call |
| TC41__SM_01_DEALLOC | Terminating Call |
| Variable | Default Value | Description |
|---|---|---|
| Timer_Start_Value | 1000 | (null) |
| Timer_NOAC_Value | 3000 | (null) |
| Timer_TAC_Short_Value | 3000 | (null) |
| Timer_TAC_Long_Value | 60000 | (null) |
| Timer_Interface_Startup_Value | 10000 | (null) |
| V5_PSTN_L3_Address | 129 | (null) |
| V5_PSTN_L3_Address_Unprovisionned | 45 | (null) |
| V5_Variant | 0 | (null) |
| V5_Interface_ID | '00000A'H | (null) |
| V5_Logical_C_Channel_Identification | 0 | (null) |
| V5_Link_1_L3_Address | 1 | (null) |
| V5_Link_2_L3_Address | 2 | (null) |
| PICS_Support_2nd_PSTN_Port | TRUE | (null) |
| PICS_Support_2nd_Link | TRUE | (null) |
| PICS_Support_V5_Ed2 | TRUE | (null) |
| PICS_Support_ISDN_Port | TRUE | (null) |
| PICS_Support_V52 | TRUE | (null) |
| Copyright © ACATS Forum 2010 on behalf of the test suite author. All rights reserved. Specifications may change subject to requirements. |
| 08 Jan 2010 | Produced by SAFIRE V20.07.36.01 www.SAFIRE-World.com |
Test Suite Overview |