| Test IUT (V5 Local Exchange) |
|---|
| TEST SUITE OVERVIEW |
| References | |
|---|---|
| Archive/Project | fixed_access/v5_l3_le_ts |
| Version | 20.07.36.01 |
| Date | 22 Sep 2009 |
| Number of Scenarios | 36 |
| Number of Groups | 13 |
| Average per Group | 2 |
| GROUP/SCENARIO | TEST PURPOSE |
|---|
| CTRL | |
|---|---|
| CTRL/ IT | |
| TC11__SM_01 | Run the test step STARTUP_LE (refer to close 4.3.1.1). |
| CTRL/ CA | |
| TC12__S1_01 | On receipt of a COMMON CONTROL message containing the control_function_id IE "variant & interface id", the IUT shall send a COMMON CONTROL ACK message containing the same control_function_id IE. |
| TC12__S1_02 | On receipt of a PORT CONTROL message containing the control_function_element IE FE204 (block_cmd), the IUT shall send a PORT CONTROL ACK message containing the same control_function_element IE. |
| CTRL/ BV | |
| CTRL/ BV/ COM | |
| TC1311S1_01 | On receipt of a COMMON CONTROL message containing the control_function_id IE "variant & interface id", the IUT shall send a COMMON CONTROL ACK message containing the same control_function_id IE. |
| TC1311SM_02 | User restarts IUT. Rx CC-VID-rq, tx ack, rx no CC-VID-rq until T_NOAC |
| TC1312SM_01 | Sending a COMMON CONTROL message containing the control_function_id IE "variant & interface id", the IUT shall send a COMMON CONTROL ACK message containing the same control_function_id IE. |
| TC1312SM_02 | On receipt of a COMMON CONTROL message containing the control_function_id IE "restart req" the IUT shall send a COMMON CONTROL message containing the control_function_id IE "restart complete". |
| CTRL/ BV/ PORT | |
| TC1324S1001 | On sending a PORT CONTROL message containing the control_function_element IE FE203 (block_cmd) the IUT shall receive a PORT CONTROL ACK message, but no further event shall appear on the V5 interface. |
| TC1324S1002 | On receipt of a PORT CONTROL message containing the control_function_element IE FE204 (block_cmd) the IUT shall send a PORT CONTROL ACK message, but no further event shall appear on the V5 interface. |
| TC1325S1004 | On receipt of a PORT CONTROL message containing the control_function_element IE FE204 (block_cmd), the IUT shall send a PORT CONTROL ACK message containing the same control_function_element IE. |
| TC1325S1007 | On receipt of a PORT CONTROL message containing the control_function_element IE FE205 (block_cmd), the IUT shall send a PORT CONTROL ACK message containing the same control_function_element IE. |
| PSTN | |
| PSTN/ IT | |
| TC21__S1_01 | Check that the IUT on receiving an DISCONNECT message sends DISCONNECT_COMPLETE message and disconnects to PSTN_path_state LE1 (Null). |
| PSTN/ BI | |
| TC25__S1_03 | Check that the IUT discards an ESTABLISH message (sends no ESTABLISH ACK message) containing an unprovisioned L3addr and remains in the PSTN_path_state LE1 (Null). |
| PSTN/ CA | |
| TC22__SM_01 | IUT sends an ESTABLISH message (after FE_Established_Req), enters PSTN_path_state LE2 (Awaiting ACK). |
| TC22__SM_02 | Check that the IUT on receiving an ESTABLISH message sends ESTABLISH ACK message and disconnects to PSTN_path_state LE1 (Null). |
| PSTN/ BV | |
| TC23__S1_01 | Check that the IUT on receiving an DISCONNECT message sends DISCONNECT_COMPLETE message and disconnects to PSTN_path_state LE1 (Null). |
| TC23__S1_02 | IUT sends an ESTABLISH message (after FE_Established_Req), enters PSTN_path_state LE2 (Awaiting ACK). |
| TC23__S1_03 | Check that the IUT on receipt of an ESTABLISH message sends ESTABLISH ACK |
| LINK | |
| LINK/ CA | |
| TC32_1S1_01 | On receipt of a LINK CONTROL message containing the link_control_function IE FE302 (link_unblock_req), the IUT shall send a LINK CONTROL ACK message containing the same link_control_function IE. |
| LINK/ BO | |
| TC34_1S1_01 | On receipt of a LINK CONTROL ACK message the IUT shall ignore the message. |
| BCC | |
| BCC/ CA | |
| TC42__SM_01 | On receipt of an ESTABLISH message, the IUT shall send an ALLOCATION message containing the originating UP referenced in the UP_ID IE and an ESTABLISH ACK message. LT1 sends an ALLOCATION COMPLETE message. On receipt of a user release message, the IUT shall send a DE-ALLOCATION message containing the originating UP referenced in the IE UP_ID IE and the allocated V5 TS referenced in the V5_TS_ID IE and a DISCONNECT message. LT1 sends a DE-ALLOCATION COMPLETE and a DISCONNECT COMPLETE message. |
| PROTECT | |
| PROTECT/ CA | |
| TC52__S0_01 | On receipt of a RESET SN COM message, the IUT shall send a RESET SN ACK message.On receipt of a second RESET SN COM message, the IUT shall not send a RESET SN ACK message. |
| Set_States | |
| V52_StartUp_LE | |
| Activate_Data_Links | |
| PROT_Reset_SN | |
| Restart_unblock_PSTN_LE1 | |
| Variant_Interface_id_procedure_CTRL_COM | |
| CTRL_PSTN_PORT_LE20_10_PSTN_LE6 | |
| CTRL_PSTN_PORT_LE10_20_PSTN_LE1 | |
| PSTN_LE6_Initial | |
| PSTN_LE1_2_Term_call_init | |
| PSTN_LE6_1_Idle | |
| PSTN_LE1_0_Out_of_order | |
| Link_Id_Request | |
| LINK_CTRL_LE10_20 | Unblocking |
| LINK_CTRL_LE20_10 | Blocking |
| Variable | Default Value | Description |
|---|---|---|
| TSPX_TIMER_Tbcc1_max | 1800 | EN 300 347-1 [1], table 46 Timer Tbcc1_max value in milliseconds. (1800 ms) |
| TSPX_TIMER_Tbcc3_max | 2400 | EN 300 347-1 [1], table 46 Timer Tbcc3_max value in milliseconds. (2400 ms) |
| TSPX_TIMER_Tbcc4_max | 1800 | EN 300 347-1 [1], table 46 Timer Tbcc4_max value in milliseconds. (1800 ms) |
| TSPX_TIMER_LCT01_max | 1200 | EN 300 347-1 [1], table 23 Timer LCT01_max value in milliseconds. (1200 ms) |
| TSPX_TIMER_TSO1_max | 1800 | EN 300 347-1 [1], table 64 Timer TSO1_max value in milliseconds. (1800 ms) |
| TSPX_TIMER_TSO3_max | 1800 | EN 300 347-1 [1], table 64 Timer TSO3_max value in milliseconds. (1800 ms) |
| TSPX_TIMER_T01_max | 1200 | EN 300 347-1 [1], table 58 Timer T01_max value in milliseconds. (1200 ms) |
| TSPX_TIMER_T02_max | 1200 | EN 300 347-1 [1], table 58 Timer T02_max value in milliseconds. (1200 ms) |
| TSPX_TIMER_T1_max | 4800 | Ref: EN 300 324-1, 13.6, table 28 Timer T1_max value in milliseconds. (4800 ms) |
| TSPX_TIMER_T2_max | 5500 | Ref: EN 300 324-1, 13.6, table 28 Max. timer value of T2, T2+T2 tolerance+tolerance of test environment. max. Value: 5.5-36 s |
| TSPX_TIMER_T2_min | 4500 | Ref: EN 300 324-1 [1], 13.6, table 28 Min. timer value of T2, T2-T2 tolerance-tolerance of test environment.min. Value: 4.5-27 s |
| TSPX_TIMER_T3_max | 2400 | EN 300 347-1 [1], table 28 Timer T3_max value in milliseconds. (2400 ms) |
| TSPX_TIMER_T4_max | 2400 | EN 300 347-1 [1], table 28 Timer T4_max value in milliseconds. (2400 ms) |
| TSPX_TIMER_AC_short | 1000 | Timer T_AC_short value in milliseconds. (1000 ms) |
| TSPX_TIMER_AC_long | 60000 | Timer T_AC_long value in seconds. (60 s) |
| TSPX_TIMER_NOAC_short | 1000 | Timer T_NOAC_short value in milliseconds. (1000 ms) |
| TSPX_TIMER_interface_startup | 30000 | Timer T_interface_startup value in seconds. (30 s) |
| TSPX_TIMER_link_failure | 5000 | Timer T_link_failure value in seconds. (5 s) |
| TSPX_TIMER_WAIT_PROT_BACK | 30000 | Time to wait before Protection Switch-Over is invoked to get initial C-channel configuration. |
| TSPX_TIMER_WAIT_SONV_BACK | 30000 | Time to wait before Switch-Over to New Variant is invoked to get initial provisioning variant. |
| Timer_Start_Value | 1000 | (null) |
| V5_PSTN_L3_Address | 1 | (null) |
| V5_PSTN_L3_Address_2 | 2 | (null) |
| V5_PSTN_L3_Address_Unprovisioned | 45 | (null) |
| V5_Variant | 0 | (null) |
| V5_Interface_ID | '00000A'H | (null) |
| V5_Logical_C_Channel_Identification | 0 | (null) |
| V5_Link_1_L3_Address | 1 | (null) |
| V5_Link_2_L3_Address | 2 | (null) |
| PICS_Support_2nd_PSTN_Port | TRUE | (null) |
| PICS_Support_2nd_Link | TRUE | (null) |
| PICS_Support_V5_Ed2 | TRUE | (null) |
| PICS_Support_ISDN_Port | TRUE | (null) |
| PICS_Support_V52 | TRUE | (null) |
| Copyright © ACATS Forum 2010 on behalf of the test suite author. All rights reserved. Specifications may change subject to requirements. |
| 08 Jan 2010 | Produced by SAFIRE V20.07.36.01 www.SAFIRE-World.com |
Test Suite Overview |